DEWENWILS 300W Outdoor Low Voltage Transformer with Timer and Photocell Sensor, 120V AC to 12V/14V AC, Weatherproof, for Halogen & LED Landscape Lighting, Spotlight, Pathway Light, ETL Listed

November 9, 2019 - Comment

How to Choose Your Transformer 1.Calculate the total wattage of your light fixtures in your plan 2.Choose the transformer that is large enough to support the total wattage you need 3.The transformer wattage load (total watts needed for your fixtures) should be within 80% of the rated capacity of the transformer. For example: if you

Buy Now! $109.99Amazon.com Price
(as of November 9, 2019 7:58 am GMT+0000 - Details)

How to Choose Your Transformer
1.Calculate the total wattage of your light fixtures in your plan
2.Choose the transformer that is large enough to support the total wattage you need
3.The transformer wattage load (total watts needed for your fixtures) should be within 80% of the rated capacity of the transformer.
For example: if you have 15 pack 13W landscape lights, so the total wattage is 195W. Then you can choose the transformer higher than 244W(=195W/0.8).

Automatic On/ Off
Attached with this transformer, the LED fixtures will turn on automatically at night and off in the morning.

120V AC to 12VAC/14VAC
You can choose 12VAC/14VAC terminal outputs according to the length and wire gauge of your cable. (Referring to the cable selection chart for more details in our use manual)

1/2/3/4/5/6/7/8/9 hour countdown
Unlike other transformers with complicated digital timer, you just need press the select button to set 1/2/3/4/5/6/7/8/9 hour countdown.

Memory function
Memory function will make the transformer remain the mode you selected before.

Resetting Key
The round resetting key bounces if overloaded, please check your circuit when it happened. Then plug and press the key.

Easy to Install
Built-in hanging holes, 3.3ft STJW 18AWG power cord, mount it on outdoor walls directly.

Specifications
Input: 120VAC, 60Hz
Output: 12VAC/14VAC
Max Power Rating: 300W

Packing List:
1 x Transformer
1 x Use Manual
2 x Screw
2 x Wall Anchor

Tips:
1.The dot(at the bottom right corner of the number on the display screen) will light on when it works.
2.The transformer has two outputs with a total power of 300W. You can choose any of them to connect with your cable.
3. Any longer than 150ft cable per tap is not recommended for connecting with the transformer.

Comments

Write a comment

*